Smartphone Holder

The Goldstrike Smartphone Holder is designed to be quick and simple, just flip the lever to lock your smartphone into the secure rubber molded fingers. Expands up to 3.25" wide. 360 degree swivel and modular capabilities.

Features

• Ambidextrous design
• One-time adjustment for your phone or GPS
• Infinite adjustment with Ciro ball mount design 
• Intuitive ball mounting system allows for a broad range of angle adjustment
• Fits devices from 2 1/8" to 3 1/2" wide
• Available with a black or chrome perch mount
• 3 Year warranty 
• U.S.Patent No. D790,528

Fitment

• Honda: All Gold Wing GL1800 (2018-up GL1800; will only fit brake side of bikes with DCT or CB switch installed), F6B, Gold Wing GL1500, All VTX1300/1800 Models, '14-up Valkyrie, Shadow 750 Aero, Ace & Spirit, Shadow 1100 
• Yamaha: All Road Star & Warrior models, all V Star models, all Venture models, all Bolt models, all Stryker models 
• Kawasaki: All Vulcan 900 models, Vulcan 1500/1600 including Mean Streak, all Vulcan 2000 models 
• Suzuki: Boulevard M/C50/C90/M109 
• Indian: All '14-up models.
• Reviews

Instructions

 Click Here For Instructions

The Goldstrike Smartphone Holder is designed to be quick and simple, just flip the lever to lock your smartphone into the secure rubber molded fingers. Expands up to 3.25" wide. 360 degree swivel and modular capabilities.

Features

• Ambidextrous design
• One-time adjustment for your phone or GPS
• Infinite adjustment with Ciro ball mount design 
• Intuitive ball mounting system allows for a broad range of angle adjustment
• Fits devices from 2 1/8" to 3 1/2" wide
• 3 Year warranty 
• U.S.Patent No. D790,528

Fitment

• 2018-up Gold Wing DCT
• 2018-up Gold Wing Tour DCT 
• 2018-up Gold Wing Tour DCT Airbag
• Will not work with models equipped with the Honda CB radio kit  

Instructions

 Click Here For Instructions

The Goldstrike left side accessory mount for DCT models puts a ball on your left hand controls. This can be used to mount a variety of Goldstrike accessories including the Goldstrike Smartphone Holder and the Goldstrike Drink Holders. Using this simple ball mount design, you may easily remove your accessory when not in use, and the mount blends right into your controls. 360 degree swivel and modular capabilities.

Features

• Fully adjustable mounting system
• Available in black to match your controls
• 360° swivel in two directions
• 3 Year warranty 

Fitment

• 2018-up Gold Wing DCT
• 2018-up Gold Wing Tour DCT
• 2018-up Gold Wing Tour DCT Airbag
• Will not work with models equipped with the Honda CB radio kit  

Instructions

Click Here For Instructions

The Goldstrike accessory perch mount puts a ball on either your left or right hand controls. This can be used to mount a variety of Goldstrike accessories including the Goldstrike Smartphone Holder, the Goldstrike Drink Holder. Using this simple ball mount design, you may easily remove your accessory when not in use, and the mount blends right into your controls.

Features

• Can be used on left or right side on bikes with manual transmission, see fitment for details. 
• Fully adjustable mounting system
• Available in chrome or satin black to match your controls
• 360° swivel in two directions
• 3 Year warranty 

Fitment

• Honda: All Gold Wing GL1800 (2018-up GL1800; will only fit brake side of bikes with DCT or CB switch installed), F6B, Gold Wing GL1500, All VTX1300/1800 Models, '14-up Valkyrie, Shadow 750 Aero, Ace & Spirit, Shadow 1100 
• Yamaha: All Road Star & Warrior models, all V Star models, all Venture models, all Bolt models, all Stryker models 
• Kawasaki: All Vulcan 900 models, Vulcan 1500/1600 including Mean Streak, all Vulcan 2000 models 
• Suzuki: Boulevard M/C50/C90/M109 
• Indian: All '14-up models.

Instructions

Click Here For Instructions

Just a simple extended ball stud, threaded to replace pretty much any M6x1.00 threaded fastener. Use as a nut, use as a bolt. Works great as a replacement screw on your handlebar controls.

Features

• Fits any Ciro Or Goldstike ball mount accessories
• Replaces most 1/4-20 or M6 x 1.0 threaded fasteners
• 1-7/8" from base to center of the ball

Fitment

• Fits any Ciro Or Goldstike ball mount accessories
• Replaces most 1/4-20 or M6 x 1.0 threaded fasteners
• 1-7/8" from base to center of the ball

Instructions

Click Here For 50132 Instructions

Click Here For 50133 Instructions

Reviews

The Goldstrike Cybercharger™ is the evolution of our top rated phone holder. We've gone back to the drawing board to completely redesign, improve, and integrate 15 watt wireless fast charging into the holder. Compatible with all the latest smartphones, in all sizes, the Cybercharger will hold your phone securely while never leaving you without a charge!

Features

• Supports up to 15W wireless charging
• IOS and Android support
• Fast charge capable
• Waterproof electronics 
• Strong reinforced black nylon components with soft touch high-grip fingers
• Easy one-handed operations
• Securely grips almost any phone including the case 
• Adjustable from 2-3/8” wide to 4” wide
• Compatible with all Ciro ball mounts
• Rotates 360 degrees allowing portrait or landscape display
• Simple wire harness included, connects directly to any 12v battery with included in-line fuse
• Locking handle can be used on either side of holder
• Adjustable gripping force
• Adjustable bottom foot to accommodate a variety of phone heights 
• Compatible with Qi-enabled cellphone devices
• Please confirm with your phone manufacture that your model phone has wireless charging capabilities prior to ordering
• 3 year warranty
• Patent Pending

Fitment

• For use with Goldstrike ball mounting system
• Phone holder is designed to work with a wide variety of cases, be sure to confirm that your case is compatible with wireless charging technology to utilize the charging features of this holder
• Please confirm with your phone manufacture that your model phone has wireless charging capabilities prior to ordering

Video

Instructions

Click Here for Instructions

The Ciro® mirror mount offers an innovative way to mount your Ciro accessories. It is especially useful for bikes that are incompatible with perch mounting, or bikes with cluttered handlebars. The mirror mount keeps your device, drink, or GPS/camera close to the controls for ultimate convenience.

Features

• A great solution for mounting Ciro accessories on metric or Harley motorcycles 
• Can be used as an alternative for bikes that are incompatible with perch mounting
• 3 Year warranty 
• Patent pending
• Drag Specialties part number: 4402-0584

Fitment

• Universal for mounting under left or right mirror stem
• H-D: Left side on all models without hydraulic clutch reservoir (excluding models with fairing mounted mirrors)
• Honda: Left or right side on all models (excluding Goldwing GL1800 and F6B) 
• Victory: Left or right side on all models excluding Vision 
• Indian: All '14-up Models on clutch side only 
• Kawasaki: Left or right side on 1700 Vulcan, Voyager, Vaquero, Vulcan 900 & 2000 models. Left side only on all other models 
• Suzuki: Left side on all models 
• Yamaha: Left or right side on Venture, Roadliner, Stratoliner and Raider. Left side on all models excluding Royal Star

Instructions

Click Here For Instructions