Metric Cruiser Accessories

The Goldstrike accessory perch mount puts a ball on either your left or right hand controls. This can be used to mount a variety of Goldstrike accessories including the Goldstrike Smartphone Holder, the Goldstrike Drink Holder. Using this simple ball mount design, you may easily remove your accessory when not in use, and the mount blends right into your controls.

Features

• Can be used on left or right side on bikes with manual transmission, see fitment for details. 
• Fully adjustable mounting system
• Available in chrome or satin black to match your controls
• 360° swivel in two directions
• 3 Year warranty 

Fitment

• Honda: All Gold Wing GL1800 (2018-up GL1800; will only fit brake side of bikes with DCT or CB switch installed), F6B, Gold Wing GL1500, All VTX1300/1800 Models, '14-up Valkyrie, Shadow 750 Aero, Ace & Spirit, Shadow 1100 
• Yamaha: All Road Star & Warrior models, all V Star models, all Venture models, all Bolt models, all Stryker models 
• Kawasaki: All Vulcan 900 models, Vulcan 1500/1600 including Mean Streak, all Vulcan 2000 models 
• Suzuki: Boulevard M/C50/C90/M109 
• Indian: All '14-up models.

Instructions

Click Here For Instructions

The Goldstrike Smartphone Holder is designed to be quick and simple, just flip the lever to lock your smartphone into the secure rubber molded fingers. Expands up to 3.25" wide. 360 degree swivel and modular capabilities.

Features

• Ambidextrous design
• One-time adjustment for your phone or GPS
• Infinite adjustment with Ciro ball mount design 
• Intuitive ball mounting system allows for a broad range of angle adjustment
• Fits devices from 2 1/8" to 3 1/2" wide
• Available with a black or chrome perch mount
• 3 Year warranty 
• U.S.Patent No. D790,528

Fitment

• Honda: All Gold Wing GL1800 (2018-up GL1800; will only fit brake side of bikes with DCT or CB switch installed), F6B, Gold Wing GL1500, All VTX1300/1800 Models, '14-up Valkyrie, Shadow 750 Aero, Ace & Spirit, Shadow 1100 
• Yamaha: All Road Star & Warrior models, all V Star models, all Venture models, all Bolt models, all Stryker models 
• Kawasaki: All Vulcan 900 models, Vulcan 1500/1600 including Mean Streak, all Vulcan 2000 models 
• Suzuki: Boulevard M/C50/C90/M109 
• Indian: All '14-up models.
• Reviews

Instructions

 Click Here For Instructions

The Goldstrike® Big Ass® Drink Holder is the perfect way to bring that 30 oz. tumbler on the road with you. The durable neoprene rubber molded net is designed to securely grip your cup so there’s no worry of losing it. The rubber is also weatherproof and won’t deteriorate in the sun or elements you encounter on the road.

Features

• Designed to work with 30 oz. tumblers and other large bottles and cups
• Made from durable neoprene rubber to grip and last
• Mounts quickly to Ciro’s line of ball mounts 
• Features a 4-1/8" diameter opening
• Available in black or chrome
• 3 Year warranty 
• Mount is not included
• *Patent Pending

Fitment

• Fits all Goldstrike ball mount accessories

Instructions

Click Here For Instructions

Bring virtually any can, bottle, or cup with you securely and in style with the Goldstrike™ Drink Holder. Chrome plated and made from tough neoprene rubber, this drink holder will really stand up to the elements.

Features

• Holds your drink secure with a contoured rubber net
• Infinite adjustment with Ciro ball mount design
• Rubber lined ring keeps your can or bottle from vibrating 
• Soft rubber net won’t scratch if it comes in contact with paint 
• Available in black or chrome
• 3 Year warranty 
• U.S. Patent No. D798,672

Fitment

• Honda: All Gold Wing GL1800 (2018-up GL1800; will only fit brake side of bikes with DCT or CB switch installed), F6B, Gold Wing GL1500, All VTX1300/1800 Models, '14-up Valkyrie, Shadow 750 Aero, Ace & Spirit, Shadow 1100 
• Yamaha: All Road Star & Warrior models, all V Star models, all Venture models, all Bolt models, all Stryker models 
• Kawasaki: All Vulcan 900 models, Vulcan 1500/1600 including Mean Streak, all Vulcan 2000 models 
• Suzuki: Boulevard M/C50/C90/M109 
• Indian: All '14-up models.

Instructions

Click Here For Instructions

The Goldstrike™ Camera Mount can be used to mount any camera that uses the GoPro® style mounting. The Camera Mount holds the camera secure while still allowing a great degree of adjustment. Never miss the perfect shot again! NOTE: The camera mount can be installed under either the left or right mirrors giving a great perspective on your ride.

Features

• Easy installation
• Attaches to the bottom bolt on your mirror
• Fully adjustable ball mount/360 degree swivel
• Stainless steel construction
• All mounting hardware included
• 3 Year warranty 

Fitment

• 2018-up Gold Wing
• 2018-up Gold Wing DCT
• 2018-up Gold Wing Tour
• 2018-up Gold Wing Tour DCT
• 2018-up Gold Wing Tour DCT Airbag

*Note: will not work with Upper Wind Deflectors

Instructions

Click Here For Instructions

Video

Bring virtually any can, bottle, or cup with you securely and in style with the Goldstrike™ Drink Holder. Gloss black or chrome plated and made from tough neoprene rubber, this drink holder will really stand up to the elements.

Features

• Holds your drink secure with a contoured rubber net
• Infinite adjustment with Ciro ball mount design
• Rubber lined ring keeps your can or bottle from vibrating
• Soft rubber net won’t scratch if it comes in contact with paint 
• 3 Year warranty 
• Available in black or chrome
• U.S. Patent No. D798,672

Fitment

• Fits any Goldstrike ball mount

Instructions

Click Here For Instructions

FAQ

• Q: Will this work with Passenger Armrest Kit 25000?
• A: No. The standard drink holder will attach to the Armrest Kit but we will never recommend it. When lifting your trunk lid the standard drink holder will not pivot properly and you take a chance of your drink spilling or falling out. We recommend using the 58007 or 58009 Big Ass Drink Holder. 

The new Ciro Smartphone Holder is designed to be quick and simple, just flip the lever to lock your smartphone into the secure rubber molded fingers.

With the Premium model ever worry about draining your phone battery while riding again! The Ciro Smartphone Holder has a built in 1.3 amp USB plug-in (cable not included) so you’ll be able to charge as you ride.

Features

• Ambidextrous design 
• One-time adjustment for your phone or GPS   
• Infinite adjustment with Ciro ball mount design
• Intuitive ball mounting system allows for a broad range of angle adjustment 
• Fits devices from 2 1/8" to 3 1/2" wide
• Available in Standard or Premium model
• Premium come with USB port for on-board charging 
• 3 Year warranty 
• U.S.Patent No. D790,528
• No mount included with this kit

Fitment

• Any Ciro ball mount.

Video

Instructions

Click Here For Instructions

The Goldstrike® Big Ass® Drink Holder is the perfect way to bring that 30 oz. tumbler on the road with you. The durable neoprene rubber molded net is designed to securely grip your cup so there’s no worry of losing it. The rubber is also weatherproof and won’t deteriorate in the sun or elements you encounter on the road.

Features

• Designed to work with 30 oz. tumblers and other large bottles and cups
• Made from durable neoprene rubber to grip and last
• Mounts quickly to Ciro’s line of ball mounts 
• Features a 4-1/8" diameter opening
• Available in black or chrome
• 3 Year warranty 
• Patent Pending

Fitment

• Honda: All Gold Wing GL1800 (2018-up GL1800; will only fit brake side of bikes with DCT or CB switch installed), F6B, Gold Wing GL1500, All VTX1300/1800 Models, '14-up Valkyrie, Shadow 750 Aero, Ace & Spirit, Shadow 1100 
• Yamaha: All Road Star & Warrior models, all V Star models, all Venture models, all Bolt models, all Stryker models 
• Kawasaki: All Vulcan 900 models, Vulcan 1500/1600 including Mean Streak, all Vulcan 2000 models 
• Suzuki: Boulevard M/C50/C90/M109 
• Indian: All '14-up models

Instructions

 Click Here For Instructions

Just a simple extended ball stud, threaded to replace pretty much any M6x1.00 threaded fastener. Use as a nut, use as a bolt. Works great as a replacement screw on your handlebar controls.

Features

• Fits any Ciro Or Goldstike ball mount accessories
• Replaces most 1/4-20 or M6 x 1.0 threaded fasteners
• 1-7/8" from base to center of the ball

Fitment

• Fits any Ciro Or Goldstike ball mount accessories
• Replaces most 1/4-20 or M6 x 1.0 threaded fasteners
• 1-7/8" from base to center of the ball

Instructions

Click Here For 50132 Instructions

Click Here For 50133 Instructions

Reviews

Mount your WASPcam® and GoPro® cameras almost anywhere on your bike.

Features

• Works with any Ciro ball mount
• Stud mount fits anywhere there is a 1/4" hole
• 1/4-20 threaded studs and mounting hardware included
• Holds your camera secure while still allowing great adjustment 
• Fits WASPcam and GoPro® cameras
• 3 Year warranty 

Fitment

• Fits anywhere there's a 1/4" hole. Ball stud has 1/4-20 thread pitch
• Common usage is the center bolt on your fairing or windshield

Video

Instructions

Click Here For Instructions 

This universal ball mount allows you to mount a Ciro accessory to any surface that will accept a 1/4-20 stud.

Features

• The Ciro Universal mount allows to you put any Ciro ball mounted accessory wherever you want
• 3 Year warranty 

Fitment

• Fits anywhere there's a 1/4-20 bolt. Common usage is the center bolt on your fairing or windshield

Instructions

Click Here For Instructions

This accessory allows you to mount your camera or GPS mounts to any Ciro ball stud.

Features

• Has bolt patterns and stud mounts for most common camera and GPS mounts
• 3 Year warranty 

Fitment

• To be used anywhere with Ciro ball mounting system

Instructions

Click Here For Instructions

The Ciro adapter for GoPro® can be used to mount your camera almost anywhere on your bike. The Ciro adapter works with any of our ball mounts to hold the camera secure while still allowing a great degree of adjustment. Never miss the perfect shot again!

Features

• Use with Ciro ball mounting system available separately
• Mounts to your existing GoPro® case
• 3 Year warranty 
• Drag Specialties part number: 4402-0585

Fitment

• To be used anywhere with Ciro ball mounting system

Instructions

Click Here For Instructions

Reviews

The Ciro® mirror mount offers an innovative way to mount your Ciro accessories. It is especially useful for bikes that are incompatible with perch mounting, or bikes with cluttered handlebars. The mirror mount keeps your device, drink, or GPS/camera close to the controls for ultimate convenience.

Features

• A great solution for mounting Ciro accessories on metric or Harley motorcycles 
• Can be used as an alternative for bikes that are incompatible with perch mounting
• 3 Year warranty 
• Patent pending
• Drag Specialties part number: 4402-0584

Fitment

• Universal for mounting under left or right mirror stem
• H-D: Left side on all models without hydraulic clutch reservoir (excluding models with fairing mounted mirrors)
• Honda: Left or right side on all models (excluding Goldwing GL1800 and F6B) 
• Victory: Left or right side on all models excluding Vision 
• Indian: All '14-up Models on clutch side only 
• Kawasaki: Left or right side on 1700 Vulcan, Voyager, Vaquero, Vulcan 900 & 2000 models. Left side only on all other models 
• Suzuki: Left side on all models 
• Yamaha: Left or right side on Venture, Roadliner, Stratoliner and Raider. Left side on all models excluding Royal Star

Instructions

Click Here For Instructions

Clean, single bolt attachment clamp made of heat treated aluminum. Compatible with Ciro accessories, including phone holders, drink holders and camera mounts. Available in chrome plated or black finish.

Features

• Ciro patented clamp design eliminates ugly pins and hinges used in traditional clamps
• Can be used to mount Ciro device holders, cup/drink holders, cameras, and more
• Made from strong aluminum
• Available in black or chrome
• U.S. Design Patent No. D832,694
• 3 Year warranty 

Fitment

7/8" and 1" round bars or 1-1/4" round bars

The Ciro® Big Ass® Drink Holder is the perfect way to bring that 30 oz. tumbler on the road with you. The durable neoprene rubber molded net is designed to securely grip your cup so there’s no worry of losing it. The rubber is also weatherproof and won’t deteriorate in the sun or elements you encounter on the road.

Features

• Designed to work with 30 oz. tumblers and other large bottles and cups
• Made from durable neoprene rubber to grip and last
• Mounts quickly to Ciro’s line of ball mounts 
• Available in chrome or black
• 3 Year warranty 
• Features a 4-1/8” diameter opening
• U.S. Design Patent No. D832,694

Fitment

7/8" and 1" round bars or 1-1/4" round bars

Ciro CMX footpegs honor the moto-x tradition of performance and function. Precision crafted and manufactured to blend aggressive looks,.great comfort, and a secure feel. 

Features

• Chrome or black aluminum peg body with CMX rubber 
• 3 Year warranty

Fitment

• For use with Ciro Hingeless Clamps

Instructions

Click Here For Instructions

FAQ

• Q: I see you have the footpeg mount in chrome, do you offer it in back also?
• No. The footpeg mount is made out of polished stainless steel so it won't rust and discolor. When you paint or powdercoat the pivoting part of the footpeg the coating will start to peel and chip off leaving a unwanted look. 

Ciro Rail footpegs compliment the styling of one of the most popular bikes in motorcycle history. Precision crafted and manufactured to blend classic styling, great comfort, and a secure feel. 

Features

• Chrome or black aluminum peg body with Rail chrome feature and rubber
• 3 Year warranty 

Fitment

• For use with Ciro Hingeless Clamps

Instructions

Click Here For Instructions

FAQ

• Q: I see you have the footpeg mount in chrome, do you offer it in back also?
• No. The footpeg mount is made out of polished stainless steel so it won't rust and discolor. When you paint or powdercoat the pivoting part of the footpeg the coating will start to peel and chip off leaving a unwanted look. 

Ciro engine guard highway peg mounting kits are the modern solution for motorcycles equipped with 1-1/4" engine guards. Our patented pinless design is the strongest and most elegant solution of any engine guard mounting clamp in the motorcycle market today. The ratcheting footpeg clevis is far superior to the "D" spring technology of days gone by, but if you need to use your "D" spring it still works. Footpegs NOT included.

Features

• Black or chrome clevis
• Mounting hardware
• 3 Year warranty 
• U.S. Patent No. D775,519

Fitment

• For use with H-D style male peg mounts with traditional "D" spring
• Mounts to any 1-1/4" round engine guard

Instructions

Click Here For Instructions

Universal fit works with any tube from 7/8" to 2-1/4". Can be used to mount Ciro device holders, cup/drink holders, cameras, and more.

Features

• The Ciro Universal mount allows to you put any Ciro ball mounted accessory wherever you want
• Works great on ATVs, UTVs, and boats. Just choose the correct adapter and clamp it down
• Kit includes stainless steel ball mount, strap, and adapters for unlimited mounting possibilities
• Patent pending
• 3 Year warranty 

Fitment

• Fits 7/8” to 2-1/4” diameter round tubing with the included stainless steel clamp or 1-1/8” to 1-3/4” square tubing

Video

Instructions

Click Here For Instructions