Tie-Down brackets for the 2018-up Gold Wing, give you a secure, easy-to-access location in which to strap down the front of your motorcycle during trailer transport or service. Powdercoated black to blend in with the motorcycle, but easy to find when needed.
Looking for a subtle accent for the mirrors and front turn signals on your Gold Wing? TWINART has your trim piece. The Mirror Surround adds just the right amount of shine! Installs in seconds and will look great for years to come.
Features
Easy installation
Available in chrome or black
Fitment
2018-up Gold Wing
2018-up Gold Wing DCT
2018-up Gold Wing Tour
2018-up Gold Wing Tour DCT
2018-up Gold Wing Tour DCT Airbag
*Does NOT work with Goldstrike Mirror Trim (P/N 78225/78226)
Left or Right Accessory Perch Mount in Black or Chrome
58110
Regular price
$28.95
The Goldstrike accessory perch mount puts a ball on either your left or right hand controls. This can be used to mount a variety of Goldstrike accessories including the Goldstrike Smartphone Holder, the Goldstrike Drink Holder. Using this simple ball mount design, you may easily remove your accessory when not in use, and the mount blends right into your controls.
Features
Can be used on left or right side on bikes with manual transmission, see fitment for details.
Fully adjustable mounting system
Available in chrome or satin black to match your controls
Honda: All Gold Wing GL1800 (2018-up GL1800; will only fit brake side of bikes with DCT or CB switch installed), F6B, Gold Wing GL1500, All VTX1300/1800 Models, '14-up Valkyrie, Shadow 750 Aero, Ace & Spirit, Shadow 1100
Yamaha: All Road Star & Warrior models, all V Star models, all Venture models, all Bolt models, all Stryker models
Kawasaki: All Vulcan 900 models, Vulcan 1500/1600 including Mean Streak, all Vulcan 2000 models
Premium Goldstrike™ Fog Light Trim Rings are designed to perfectly match the lines of your bike, while bringing interest to the otherwise plain, black fog light housings.
Goldstrike picks up where the factory left off, complete the look of the fender with our Goldstrike Side Panel Vent Trim. They install in seconds and accentuate the styling of your Gold Wing. Works great with the Front Fender Vent Trim.
Goldstrike™ picks up where the factory left off, complete the look of the fender with our Goldstrike Front Fender Vent Trim. They install in seconds and accentuate the styling of your Gold Wing. Works great with the Side Panel Vent Trims.
Dress up the rear of your Gold Wing with the curved Goldstrike™ License Plate Frame. This frame complements your motorcycle’s styling and features hidden fasteners to provide an ultra-clean look.
Features
Hidden fasteners
Slightly curved and complimentary styling
Easy removal for registration tab placement
Available in black or chrome
Accommodates standard U.S. license plates (size 4"x7")
The Goldstrike™ Camera Mount can be used to mount any camera that uses the GoPro® style mounting. The Camera Mount holds the camera secure while still allowing a great degree of adjustment. Never miss the perfect shot again! NOTE: The camera mount can be installed under either the left or right mirrors giving a great perspective on your ride.
The Goldstrike™ Frame Covers are designed with beauty and longevity in mind. Upgrade your motorcycle's profile with these brilliant chrome or gloss black painted ABS covers. They cover each side of the exposed frame for a distinctive appearance that will set your Gold Wing apart from the rest. Works well with Swingarm Pivot Covers or Adjustable Passenger Comfort Pegs (not included).
Features
Molded ABS covers to cover each side of the exposed frame
The stock engine guards leave a lot to be desired. Twinart has created chrome ABS covers that install easily and add just the right amount of sophistication to an otherwise mundane component.
Features
Chrome plated ABS plastic
Easy and quick installation
Decorative accent
Quickly change the appearance of your bike with no tools required
The Goldstrike™ Fork Leg Covers will completely transform the front of your motorcycle by covering up the dull, plain metal, front fork in either bright chrome or gloss black. Installation is easy and requires no disassembly of the fork.
*Does not work with Honda caliper covers
Features
Available in black or chrome
Ultimate styling upgrade
Simple installation
Requires no disassembly of the fork
Easy to clean
Works with or without the reflector
Will not work on trike conversions with extended front fork
Trike fitments are not tested by Goldstrike. Information is supplied to Goldstrike by trike manufacturers and installers for direct fitment only. Any modifications of Goldstrike products are done at the installer's / owner's risk. Modifications may void warranties from Goldstrike or from the trike manufacturer. If you have any questions please contact Goldstrike at 715-808-0027.
The Goldstrike™ Fender Filler Strips are the answer to filling in the ugly gaps between your saddlebags and rear fender. Simply slide the filler strips onto each side of the fender, and retain them with the included hidden screws. The fillers are made from durable EPDM rubber, which will still allow the fender to be easily removed for service.
The Goldstrike Vented Caliper Covers are designed to streamline the front end of your motorcycle and hide the unsightly wiring and brake lines. These covers ensure efficient cooling with their sleek, modern style.
Features
Lightweight heat resistant ABS
Venting for caliper cooling
Easy installation
Removable for service
Easy to clean
Covers caliper and brake lines
Works well with all Goldstrike front end accessories
Trike fitments are not tested by Goldstrike. Information is supplied to Goldstrike by trike manufacturers and installers for direct fitment only. Any modifications of Goldstrike products are done at the installer's / owner's risk. Modifications may void warranties from Goldstrike or from the trike manufacturer. If you have any questions please contact Goldstrike at 715-808-0027.
The stock saddlebag guards leave a lot to be desired. Twinart has created chrome ABS covers that install easily and add just the right amount of sophistication to an otherwise mundane component.
Features
Chrome plated ABS plastic
Easy and quick installation
Decorative accent
Quickly change the appearance of your bike with no tools required
Twinart's Front Brake Master Cylinder Cover is a quick addition to bring a little added chrome to your front hand controls. This cover is made from die cast aluminum and installs in minutes. It maintains the factory seal, but still allows easy access when service is needed. A clear view of the sight glass allows quick checking of fluid condition and level.
Features
Chrome plated cast aluminum
Easy and quick installation
Decorative accent
Quickly change the appearance of your bike with no tools required
